AIX5.3在使用HACMP安装ORACLE RAC 10G时的错误解决 集中讨论37

wsql

Oracle大型数据库系统在AIX/UNIX上的实战详解 集中讨论37 文平
  有几个读者在实施他们的RAC的时候，重启HACMP后发现另一个节点的并发卷组并没有激活（lsvg -o），查看PV发现没有激活（CONCURRENT ACTIVE）。
  器可能原因如下（Oracle Release Notes）：
  To enable simultaneous access to a disk device from multiple nodes, you must set the appropriate Object Data Manager (ODM) attribute listed in the following table to the value shown, depending on the disk type:
  Disk Type Attribute Value   
SSA, FAStT, or non-MPIO-capable disks reserve_lock no
  ESS, EMC, HDS, CLARiiON, or MPIO-capable disks   
reserve_policy no_reserve
  To determine whether the attribute has the correct value, enter a command similar to the following on all cluster nodes for each disk device that you want to use:   
# /usr/sbin/lsattr -E -l hdiskn     
If the required attribute is not set to the correct value on any node, then enter a command similar to one of the following on that node:     
■ SSA and FAStT devices     
# /usr/sbin/chdev -l hdiskn -a reserve_lock=no     
■ ESS, EMC, HDS, CLARiiON, and MPIO-capable devices     
# /usr/sbin/chdev -l hdiskn -a reserve_policy=no_reserve
  所以，需要在2个节点上关闭HACMP后分别执行：
  chdev -l hdisk2 -a reserve_lock=no   
chdev -l hdisk3 -a reserve_lock=no     
chdev -l hdisk4 -a reserve_lock=no     
chdev -l hdisk5 -a reserve_lock=no
  或者：
  chdev -l hdisk2 -a reserve_policy=no_reserve   
chdev -l hdisk3 -a reserve_policy=no_reserve     
chdev -l hdisk4 -a reserve_policy=no_reserve     
chdev -l hdisk5 -a reserve_policy=no_reserve
  再重新启动HACMP，应该就没有问题了。