linux下实现glassfish自动启动
1. 首先在 创建文件/etc/init.d/glassfish3, 文件内容如下. 注意修改下列内容的红色部分(不好意思，全部用英文写的)#! /bin/sh# This shell script takes care of starting and stopping# the glassfish DAS and glassfish instance.## chkconfig: - 64 36# description: glassfish management# processname: glassfish#if you face any problems add the path to your Java#this way (see Jeffrey's comments below)export AS_JAVA=/usr/java/jdk1.6.0_17#export CLASSPATH=.;$AS_JAVA/lib/dt.jar;$AS_JAVA/lib/tools.jarGLASSFISHPATH=/opt/glassfish3/binexport PASSWD=/opt/glassfish3/bin/.passwdcase "$1" instart)echo "starting glassfish from $GLASSFISHPATH"su - root $GLASSFISHPATH/asadmin start-domain#start your instance at start time, if you do not have instance, comment these two linesecho "starting instance st_server"$GLASSFISHPATH/asadmin --user admin --passwordfile $PASSWD start-instance st_server#we need to use this later when we enable https#sudo -u glassfish $GLASSFISHPATH/asadmin --secure start-domain domain1;;status)$0 start;;restart)$0 stop$0 start;;stop)echo "stopping instance st_server"$GLASSFISHPATH/asadmin --user admin --passwordfile $PASSWD stop-instance st_serverecho "stopping glassfish from $GLASSFISHPATH"su - root $GLASSFISHPATH/asadmin stop-domain#we need to use this later when we enable https#sudo -u root $GLASSFISHPATH/asadmin --secure stop-domain domain1;;*)echo $"usage: $0 {start|stop|restart|status}"exit 3;;esac
设置成可执行文件,
$ sudo chmod +x /etc/init.d/glassfish3
其中的password文件如下
AS_ADMIN_PASSWORD=administration-password请将 administration-password修改成你自己的密码
2. 查看刚刚添加的服务
chkconfig --list glassfish3 你应该看到
glassfish3 0:off1:off2:off3:off4:off5:off6:off
所有的系统启动级别glassfish都是不自动启动的
3. 修改成自动启动
chkconfigglassfish3 on
它会自动帮你添加系统的启动级别，这时再重复一下第二步检查一下启动级别。
你应该会看到
glassfish 0:off1:off2:on 3:on 4:on 5:on 6:off
一般linux的系统级别都是在3或者5上，你可以用命令 who -r 查看你系统的启动级别。
好了，现在你可以重启一下系统来检查一下你的glassfish是否自动启动了。呵呵，其实这个你稍微改一下就可以让你的tomcat， jboss自动启动的
页:
[1]