linux下显示网卡设备及驱动信息intel shell脚本
<div style="font-weight: normal; font-size: 11pt; color: #000000; font-style: normal; font-family: "Monaco"; background-color: #ffffff; text-decoration: none;">intel 发布的, 需具备有lspci 及ethtool 两个命令.用户查看网卡信息非常方便#! /bin/bash#******************************************************************************#Copyright(c) 1999 - 2008 Intel Corporation.##This program is free software; you can redistribute it and/or modify it#under the terms and conditions of the GNU General Public License,#version 2, as published by the Free Software Foundation.##This program is distributed in the hope it will be useful, but WITHOUT#ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or#FITNESS FOR A PARTICULAR PURPOSE.See the GNU General Public License for#more details.##You should have received a copy of the GNU General Public License along with#this program; if not, write to the Free Software Foundation, Inc.,#51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.##Contact Information:#Linux NICS <linux.nics@intel.com>#Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497#******************************************************************************#Determine how many Ethernet & Network controllers are installed in the systemTotalControllers=`lspci | grep -c -i 'Ethernet Controller\|Network Controller'`temp=`lspci | grep -i 'Ethernet Controller\|Network Controller'|cut -f1 -d " "`#Define two arrays for storing IPPortsdeclare -a IOPorts1declare -a IOPorts2#Populate IOPorts1 with bus info from lspci.Populate IoPorts2 with bus info#from ethtool.for (( counter=0 ; counter < $TotalControllers ; counter++ )) do offset=$(($counter+1)) IOPorts1[$counter]=`echo $temp|cut -f$offset -d" "` if (ethtool -i eth$counter) &> /dev/null; then IOPorts2[$counter]=`ethtool -i eth$counter|grep 'bus-info'|cut -f3- -d :` fi done#Loop through both arrays and determine if there's a match in IOPort1 & IOPort2.If so#then the driver is loaded, and write to screen all the related information.If there#is no match then there isn't a driver loaded for that device and write to screen only#the information available from lspcifor ((counter=0 ; counter < $TotalControllers ; counter++)) do Match=0 for ((counter1=0 ; counter1 < $TotalControllers; counter1++)) do if [ "${IOPorts1[$counter]}" = "${IOPorts2[$counter1]}" ]; then Match=1 DeviceID=`lspci -nn | grep ${IOPorts2[$counter1]} |cut -f3- -d"["| cut -c 1-9` EthernetController=`lspci -v |grep ${IOPorts2[$counter1]} | cut -f4- -d" "|cut -f1 -d"("` AdapterName=`lspci -v | grep ${IOPorts2[$counter1]} -A 1 | grep 'Subsystem'|cut -f2- -d" "` DriverName=`ethtool -i eth$counter1 | grep -i 'driver' | cut -f2 -d" "` DriverVersion=`ethtool -i eth$counter1 | grep -m 1 -i 'version'| cut -f2 -d" "` echo "eth$counter1 : ${IOPorts2[$counter1]}" echo " Make/Model = $AdapterName" echo " Ethernet controller = $EthernetController" echo " VenID:DevID = $DeviceID" echo " Driver name = $DriverName" echo " Driver version = $DriverVersion" fi done if [ "$Match" = "0" ] ; then DeviceID=`lspci -nn | grep ${IOPorts1[$counter]} |cut -f3- -d"["| cut -c 1-9` EthernetController=`lspci -v |grep ${IOPorts1[$counter]} | cut -f4- -d" "|cut -f1 -d"("` AdapterName=`lspci -v | grep ${IOPorts1[$counter]} -A 1 | grep 'Subsystem'|cut -f2- -d" "` echo ": ${IOPorts1[$counter]}" echo " Make/Model = $AdapterName" echo " Ethernet controller = $EthernetController" echo " VenID:DevID = $DeviceID" echo " Driver name = No driver loaded" echo " Driver version = No driver loaded" fi doneexit 0
页:
[1]